Journal of Arid Regions Geographic Studies

Journal of Arid Regions Geographic Studies

Optimization of form, aspect ratio and orientation of building based on solar radiation and wind direction (Case studies: Tabriz, Yazd and Bandar Abbas cities)

Authors
Abstract
The renewable energies (such as solar energy), could be provided through designing architectural and urban spaces compatible with the climate and the ecosystem of the region, taking into consideration the architectural features of the building such as its form, dimensions and orientation. The purpose of this research was to determine the most suitable form, aspect ratio and orientation of the building for receiving optimal solar radiation and
The prevailing wind direction in Tabriz, Yazd and Bandar Abbas cities. In this research, six common geometric forms, including square, rectangular (EW and NS orientation), hexagonal, octagonal, hexadecagon, and triacontadigon (circle) with an equal area and elevation facing the South, were studied and among them, the form of rectangle, with aspect ratios of 1:1.2, 1:1.4, 1:1.6, 1:1.8 and 1:2, in the directions 120, 135, 150, 165 and 180 degrees SE, and SW has been studied. The amount of received radiation energy on vertical surfaces has been calculated and processed through theoretical and real calculation, using the “Law of Cosines” computational method for different months and in 32 geographic directions , in terms of the cold and hot periods of the year. The results of the research show that the best form of building in all studied cities is rectangular with East-West orientation and the next form is the square. The most suitable aspect ratio for the rectangular form with the East-West orientation is 1:1.2 in Tabriz city and 1:1.6 in Yazd and Bandar Abbas cities. Suitable orientation of the building based on solar radiation and
The prevailing wind direction in Tabriz city is 165 degree SE and in Yazd and Bandar Abbas cities is 180 degree south.
Keywords

Ahsan, T., Svane, O. (2010). Energy efficient design features for residential buildings in tropical climates: the Context of Dhaka, Bangladesh. Sustainable Architecture and Urban Development. 4, 183–202. AlAnzi, A., Seo, D., Krarti, M., (2009). Impact of building shape on thermal performance of ofiice, buildings in Kuwait. Energy Conversion and Management. 50, 822-828. Barzegar, Z., Heydari, Sh. (2012). Evaluuation of the effect of biulding orientation on achieved solar radiation-a NE-SW orientated case of urban residence in semi-arid climate. International Journal of Architectural Engineering & Urban Planning. 22(2), 108-113. Cheung, C., Fuller, R., Luther, M. (2005). Energy-efficient envelope design for high-rise apartments. Energy and Buildings. 37(1), 37–48. Depecker, P., Menezo, C., Virgone, J., Lepers, S. (2001). Design of buildings shape and energetic consumption. Building and Environment. 36, 627–635. Gratia, E., De Herde, A. (2002). Design of low energy office buildings. Energy and Buildings. 35, 473-491. Ihm, P., Krarti, M. (2012). Design optimization of energy efficient residential buildings in Tunisia. Building and Environment. 58, 81–90. IRIMO, Islamic Republic of Iran Meteorological Office, Data Center, Tehran. http://www.irimo.ir/far/wd/2703. McKeen, P., Fung, A.S. (2014). The effect of building aspect ratio on energy efficiency: A case study for multi-unit residential buildings in Canada. Buildings. 4, 336-354. Mirrahimi, S., Mohamed, M.F., Haw, L.C., Ibrahim, N.L.N., Yusoff, W.F.M., Aflaki, A. (2016). The effect of building envelope on the thermal comfort and energy saving for high-rise buildings in hot-humid climate. Renewable and Sustainable Energy Reviews. 53, 1508–1519. Ourghi, R., Al-Anzi, A., Krarti, M. (2007). A simplified analysis method to predict the impact of shape on annual energy use for office buildings. Energy Conversion and Management. 48(1), 300–305. Watson, D., Labs, K., (1983). Climate design: Energy efficient building principles and practices. McGraw-Hill, New York, 37. Wei, L. Tian, W., Zuo, J., Yang, Zh., Lui, Y., Yang, S. (2016). Effects of building form on energy use for buildings in cold climate regions, Procedia Engineering, 146: 182-189. Yıldız, Y., Arsan, Z.D. (2011). Identification of the building parameters that influence heating and cooling energy loads for apartment buildings in hot-humid climates. Energy 36(7), 4287–4296.

  • Receive Date 23 November 2022
  • Publish Date 23 November 2022